Category

Occupational Safety

241 articles
Occupational Safety

RIDDOR Reporting: 5 Gaps That Turn a Legal Record Into Weak Prevention

RIDDOR reporting is a legal duty, but a compliant form can still leave prevention weak. This diagnostic shows five gaps that keep incident classification, evidence, ownership, and corrective action disconnected.

8 min
Occupational Safety

ANSI Z590.3 explained: 4 design decisions

Learn what ANSI/ASSP Z590.3-2021 means in practice and how four design decisions reduce worker exposure before procedures carry the burden of control.

4 min
Occupational Safety

New Contractor Safety Owner in 45 Days: Close Interface Risk

A 45-day role profile for contractor safety owners to clarify interfaces, verify critical controls, and close procurement, mobilization, and handover gaps before work begins.

6 min
Occupational Safety

Collective Protective Measures Explained: 4 Control Choices Before PPE

Collective protective measures reduce exposure for several people through design, isolation, guarding, or engineered separation. This explainer defines four control choices and shows supervisors how to verify that they work before PPE becomes the main defense.

5 min
Occupational Safety

Emergency Drills: 4 False Beliefs That Make Response Readiness Look Complete

A completed emergency drill is not proof that a site can control a real event. These four false beliefs expose the difference between rehearsing a plan and testing the decisions, resources, and control reliability that protect people under pressure.

6 min
Occupational Safety

How to Run a Confined-Space Rescue Readiness Review Before Entry

A confined-space entry is not ready when the permit is complete. It is ready when the rescue team, equipment, route, communications, and decision authority have been tested against the actual space.

7 min
Occupational Safety

JSA vs Bow-Tie vs Critical-Control Verification: Which Evidence Should a Supervisor Trust Before High-Risk Work?

JSA, Bow-Tie analysis, and critical-control verification answer different safety questions. This comparison shows which method should lead before high-risk work, what evidence each method can prove, and where supervisors are most likely to mistake paperwork for control.

9 min
Occupational Safety

Energy Isolation Explained: 3 Safety States

Energy isolation is more than a lock on a switch. Learn the three states teams must separate before maintenance, testing, or entry into hazardous equipment.

4 min
Occupational Safety

How to Verify an Excavation and Trenching Plan Before Entry in 60 Minutes

A signed excavation plan is only a starting point. This eight-step field review helps a competent person, supervisor, or EHS manager confirm that soil conditions, utilities, protective systems, access, plant movement, and rescue decisions match the work about to begin.

6 min
Occupational Safety

Safety-Critical Procurement: 5 Decisions That Stop a Low-Bid Purchase From Becoming a Field Exposure

A purchase order can satisfy a commercial process while leaving the real exposure unchanged. This F1 diagnostic shows how EHS, engineering, operations, and procurement leaders can test whether a safety-critical purchase will still protect people after delivery, installation, handover, and maintenance.

7 min