Category

Occupational Safety

241 articles
Occupational Safety

How to Build a Night-Shift Fatigue Control Plan for a 24/7 Operation in 30 Days

A night-shift fatigue plan should change scheduling, task exposure, supervision, recovery, and escalation rather than ask workers to be more careful. This eight-step guide shows EHS managers and operations leaders how to build a practical 30-day control plan for a 24/7 operation.

7 min
Occupational Safety

PPE at Work: 6 Myths That Keep Higher-Level Controls Off the Table

PPE is essential in many tasks, but it becomes a management shortcut when visible compliance replaces exposure reduction. This mythbusting guide shows EHS leaders how six common assumptions can keep higher-level controls from being designed, funded, and verified.

7 min
Occupational Safety

Temporary Workforce Safety: 8 Failures That Make Onboarding Look Complete While Exposure Remains

A temporary worker can complete orientation, sign a checklist, and still be unprepared for the exposure created by the actual task. This diagnostic separates onboarding paperwork from operational readiness and shows EHS leaders where temporary workforce controls usually fail.

6 min
Occupational Safety

West, Texas: When Inventory Control Became a Life-Safety Decision

The 2013 West Fertilizer explosion was not only a storage failure. The CSB investigation shows how hazardous inventory, emergency planning, land-use decisions, and weak ownership can combine until a routine fire becomes a community-scale loss.

5 min
Occupational Safety

How to Plan a Critical Lift Before the Crane Arrives: 6 Hold Points for Supervisors

A critical lift plan is useful only when it turns a high-consequence movement into a sequence of verified decisions, with clear authority to stop when field conditions change.

8 min
Occupational Safety

Imperial Sugar: How a Dust Problem Became a Fatal Exposure

The 2008 Imperial Sugar explosion was not simply a housekeeping failure. It was a control-system breakdown in which combustible dust, hidden accumulation, weak equipment design, and delayed leadership action combined into a fatal exposure.

5 min
Occupational Safety

How to Verify Machine Guarding Before Restart in 60 Minutes

A practical 60-minute method for supervisors to verify machine guarding, test the restart boundary, and prevent paperwork from substituting for physical protection.

8 min
Occupational Safety

How to Verify an SDS Before a Chemical Task: 8 Checks for Supervisors

A practical eight-step method for supervisors to verify a safety data sheet against the chemical task, controls, emergency response, and worker briefing before work begins.

6 min
Occupational Safety

How to Run a Lockout/Tagout Verification Walkdown Before Maintenance

A field-ready LOTO walkdown for maintenance supervisors who need to confirm energy isolation, stored-energy control, worker understanding, and restart readiness before servicing begins.

7 min
Occupational Safety

Triangle Shirtwaist Factory Fire: What One Inaccessible Exit Revealed About Safety Leadership

The Triangle Shirtwaist Factory fire shows why emergency controls must remain available under pressure, and why leadership owns the conditions that make escape possible.

6 min